Installation Diagram
Get the i-Neighbour Siren Kit to enhance your residential security system fuss-free! The Siren Kit has a Raspberry Pi controller, an I/O board, and a power supply encased in a compact casing for an easy installation at the guardhouse. The Siren Kit connects effortlessly to your i-Neighbour residential management system account at all times through an active Internet connection and it is designed to link to LED display panel and alarm siren with strobe light that are weatherproof and suitable for outdoor environment.
In any episode where a resident pushes the Panic Button from the i-Neighbour app during emergencies, the i-Neighbour Siren Kit will display the resident’s unit number on the LED panel, and set off the siren to alert the on-duty security officers for rescue.
Simple, effective and affordable, i-Neighbour Siren Kit is an extra security you need to strengthen your security during emergencies.
| HARDWARE | ||
| Surface Finishing | : | Acrylonitrile Butadiene Styrene (ABS) |
| Dimension, mm | : | 212 x 49 x 114 |
| POWER SUPPLY | ||
| Power Input | : | AC110 - 240V (Universal Input) |
| Backup Power | : | UPS or 12VDC rechargeable battery |
| SIREN KIT I/O | ||
| Input | : | 4 x Digital Input |
| Output | : | 12VDC 1A strobe sight, 12VDC 3A siren,5A Dry contact free relay |
| RASPBERRY PI CONTROLLER | ||
| Processor | : | 1.2 GHz 64bit Broadcom BCM2837, 1GB RAM |
| WiFi | : | BCM43438 - Single-Chip IEEE 802.11 b/g/n MAC/Baseband/Radio |
| Bluetooth | : | BCM43438 - Bluetooth Low Energy |
| USB | : | 4x USB 2.0 |
| GPIO | : | 40 pin |
| HDMI | : | Full size HD output |
| Power input | : | 5.1 VDC 2.5A |
| SUPPORTED ACCESSORIES | ||
| Alarm Siren and Strobe Light | : | Amplifies alert during emergencies |
| Support Back up Battery | : | Works with AC 100 ~ 240V (universal input) and backed up by a 12VDC rechargeable battery to work during power failure. |
| HDMI Output | : | Provides the option to display the residents’ addresses on other devices such as computer monitor instead of LED panel. |
| Action Buttons | : | Allows 3-button pack for security guard to trigger and to stop the siren kit manually, as well as acknowledge the receipt of emergency report. |
| THE PANEL & FRAME | ||
| Dimension, (mm) | : | 160 x 960 x 51 |
| Thickness (mm) | : | 50 |
| Build up material | : | Extruded aluminium PVC back cover & corner |
| Color | : | Chrome & black |
| THE POWER & CONSUMPTION | ||
| Power supply | : | 230VDC +/- 10% 56/60Hz |
| Power Consumption | : | 10W without load, 200W Max load (8 panels), 400W Max load (16 panels) |
| Max Watts per pixel (W) | : | 0.08 |
| Display color | : | Red |
| Brightness levels | : | Up to 15 levels |
| THE INSTALLATION & WORKING ENVIRONMENT PERFORMANCE | ||
| Operating temperature (°C) | : | 0 ~ 40 |
| Storage temperature (°C) | : | 0 ~ 60 |
| Relative humidity | : | < 95% non-condensing |
| Module matrix | : | 16 (H) x 32 (W) |
| Character row pitch (mm) | : | 10 |
| Column pitch (mm) | : | 10 |
| Horizontal viewing angle | : | 160 |
| LED diode life | : | Estimated 100,000 hours |
| Communication interface | : | RS 232/USB/Wireless/LAN |
| Cable length | : | Power cable – 3 m, USB cable – 4 m |
| Memory retention | : | Approximate 3 months |
| Surface Finishing | : | ABS |
| Operating power input | : | 12 ~ 15VDC 1.2A |
| Siren operating consumption | : | 12VDC 220mA |
| Strobe light operating consumption | : | 12VDC 180mA |
| Size (mm) | : | 265 x 170 x 65 |
| Weight (kg) | : | 0.65 |
| Siren volume | : | 120±3db@1m |
| Strobe light flash rate | : | >= 70 times/min |
| Tamper protection | : | 2 |
| IP rating | : | IP-54 |
| Backup battery | : | 12v1.2A sealed lead battery |
| Certificate | : | CE, EMC |
